Heat treatment influence on the structural and magnetic properties of the intermetallic Fe56.25Al43.75 alloy prepared by mechanical alloying and arc-melted

J. S.Trujillo Hernández, J. A. Tabares, G. A.Pérez Alcázar

Resultado de la investigación: Contribución a una revistaArtículo de la conferenciarevisión exhaustiva

1 Cita (Scopus)


Alloys of the Fe56.25Al43.75 system were prepared by mechanical alloying (MA) using a high energy planetary ball mill, with milling times in the range from 12 up to 96 h named MA0 samples. The sample milled for 48 hours was heat treated at 700 °C for 9 days. Then this sample was milled for times of 1, 4, 8, 12, 24, and 48 h, named MA1 samples. Additionally, and for comparison, it was prepared a Fe56.25Al43.75 sample by arc-melting method. For all samples, the structural and magnetic study was conducted by X-rays diffraction (XRD) and Mössbauer spectrometry (MS). The XRD results show that the system is nanostructured and the MA0 samples present only the BCC disordered phase, whose lattice parameter remains relatively constant with milling time. For MA1 samples it was identify the FeAl, Fe 3Al, FeO and α-Fe phases. The Mössbauer spectra for all samples were fitted by using a hyperfine magnetic field distribution (HMFD), and a paramagnetic site for all the times used here. The ferromagnetism increases when milling time increases, and this is a consequence of the structural disorder induced by mechanical alloying.

Idioma originalInglés
Número de artículo012020
PublicaciónJournal of Physics: Conference Series
EstadoPublicada - 1 ene 2014
Evento21st Latin American Symposium on Solid State Physics, SLAFES 2013 - Villa de Leyva, Colombia
Duración: 30 sep 20134 oct 2013


Profundice en los temas de investigación de 'Heat treatment influence on the structural and magnetic properties of the intermetallic Fe<sub>56.25</sub>Al<sub>43.75</sub> alloy prepared by mechanical alloying and arc-melted'. En conjunto forman una huella única.

Citar esto